# Communications > Source: QuizVDS.it (EASA ECQB-SPL) | 50 questions > Free practice: https://quizvds.it/en-en/quiz/spl-en --- ### Q1: In which situations should a pilot use blind transmissions? ^q1 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^q1)* - A) When a pilot has flown into cloud or fog unintentionally and therefore would like to request navigational assistance from a ground unit - B) When the traffic situation at an airport allows the transmission of information which does not need to be acknowledged by the ground station - C) When no radio communication can be established with the appropriate aeronautical station, but when evidence exists that transmissions are received at that ground unit - D) When a transmission containing important navigational or technical information is to be sent to several stations at the same time **Correct: C)** > **Explanation:** A blind transmission is used when two-way communication cannot be established, but the pilot has reason to believe the ground station can still receive. This commonly occurs when the aircraft receiver is faulty. The pilot continues transmitting relevant information — such as position and intentions — so the ground unit can at least track the situation and coordinate as needed. ### Q2: Which abbreviation is used for the term "abeam"? ^q2 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^q2)* - A) ABB - B) ABM - C) ABE - D) ABA **Correct: B)** > **Explanation:** ABM is the ICAO-standard abbreviation for "abeam," meaning a position at a right angle to the aircraft's track — i.e., directly to the side. This abbreviation appears in flight plans, ATC communications, and aeronautical charts. It is important to use the standardized form rather than informal alternatives to ensure unambiguous interpretation across language barriers. ### Q3: Which abbreviation is used for the term "visual flight rules"? ^q3 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^q3)* - A) VFS - B) VRU - C) VFR - D) VMC **Correct: C)** > **Explanation:** VFR stands for Visual Flight Rules, the regulatory framework under which a pilot operates by visual reference to the ground and other aircraft. VMC (Visual Meteorological Conditions) refers to the weather conditions themselves, not the rules. VFR and VMC are related but distinct terms — a pilot files and flies VFR when the weather meets VMC criteria. ### Q4: Which abbreviation is used for the term "obstacle"? ^q4 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^q4)* - A) OBST - B) OBTC - C) OST - D) OBS **Correct: A)** > **Explanation:** OBST is the ICAO-standard abbreviation for obstacle, as defined in ICAO Annex 10 and used in NOTAMs, aeronautical publications, and ATC communications. It appears frequently in aerodrome obstacle data and NOTAM texts. OBS, while intuitively plausible, is reserved for other terms (e.g., observation) in ICAO documentation. ### Q5: What does the abbreviation "FIS" stand for? ^q5 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^q5)* - A) Flight information service - B) Flashing information system - C) Flight information system - D) Flashing information service **Correct: A)** > **Explanation:** FIS — Flight Information Service — is a service provided by ATC units to give pilots information useful for the safe and efficient conduct of flight, such as weather, NOTAMs, and airspace activity. In many countries, glider pilots operating outside controlled airspace will communicate with an FIS unit (e.g., on a national FIS frequency) rather than a tower or radar controller. ### Q6: What does the abbreviaton "FIR" stand for? ^q6 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^q6)* - A) Flight information region - B) Flight integrity receiver - C) Flow integrity required - D) Flow information radar **Correct: A)** > **Explanation:** A Flight Information Region (FIR) is a defined volume of airspace within which flight information service and alerting service are provided. Each country or group of countries has one or more FIRs, and they cover all airspace including lower and upper airspace. Glider pilots should know the FIR they are operating in, as this determines which FIS frequency applies. ### Q7: What does the abbreviation "H24" stand for? ^q7 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^q7)* - A) No specific opening times - B) 24 h service - C) Sunrise to sunset - D) Sunset to sunrise **Correct: B)** > **Explanation:** H24 indicates continuous operation — 24 hours a day, 7 days a week. This designation appears in AIP entries and NOTAMs to describe permanently staffed facilities such as major ATC centres or rescue coordination centres. It contrasts with HX (no specific hours), HJ (sunrise to sunset), and HN (sunset to sunrise). ### Q8: What does the abbreviation "HX" stand for? ^q8 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^q8)* - A) 24 h service - B) Sunrise to sunset - C) No specific opening hours - D) Sunset to sunrise **Correct: C)** > **Explanation:** HX means the facility operates at no specific or predetermined hours — it may be available on request or intermittently. Pilots must verify actual availability via NOTAM or direct contact before relying on such a service. This is distinct from H24 (always open), HJ (daylight only), and HN (night only). ### Q9: The altimeter has to be set to what value in order to show zero on ground? ^q9 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^q9)* - A) QTE - B) QFE - C) QNE - D) QNH **Correct: B)** > **Explanation:** QFE is the atmospheric pressure at aerodrome level. When set on the altimeter's subscale, the instrument reads zero when the aircraft is on the ground at that aerodrome. This setting is sometimes used at glider aerodromes so circuit heights are read directly as heights above field. QNH, by contrast, gives altitude above mean sea level. ### Q10: Which altitude is displayed on the altimeter when set to a specific QNH? ^q10 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^q10)* - A) Altitude in relation to mean sea level - B) Altitude in relation to the 1013.25 hPa datum - C) Altitude in relation to the highest elevation within 10 km - D) Altitude in relation to the air pressure at the reference airfield **Correct: A)** > **Explanation:** QNH is the local altimeter setting that, when dialled into the subscale, causes the altimeter to indicate the aircraft's altitude above mean sea level (AMSL). It is the standard setting used for navigation and ATC altitude assignments below the transition altitude. Glider pilots use QNH to ensure terrain clearance and compliance with published airspace limits. ### Q11: Which altitude is displayed on the altimeter when set to a specific QFE? ^q11 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^q11)* - A) Altitude in relation to the 1013.25 hPa datum - B) Altitude in relation to the air pressure at the reference airfield - C) Altitude in relation to mean sea level - D) Altitude in relation to the highest elevation within 10 km **Correct: B)** > **Explanation:** With QFE set, the altimeter reads height above the reference aerodrome — typically showing zero on the ground and the circuit height directly as a height above field. While useful at the home aerodrome, QFE requires care when operating away from base, as the reading no longer relates to sea level or terrain elsewhere. ### Q12: What is the correct term for a message used for air traffic control? ^q12 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^q12)* - A) Meteorological message - B) Message related to direction finding - C) Flight safety message - D) Flight regularity message **Correct: C)** > **Explanation:** ICAO classifies aeronautical messages by priority. Flight safety messages — which include ATC instructions, position reports, and related communications — hold the highest priority after distress and urgency messages. This classification ensures that safety-critical information is never delayed by lower-priority traffic such as administrative or regularity messages. ### Q13: Distress messages are messages... ^q13 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^q13)* - A) Concerning the safety of an aircraft, a watercraft or some other vehicle or person in sight. - B) Concerning the operation or maintenance of facilities which are important for the safety and regularity of flight operations. - C) Concerning aircraft and their passengers which face a grave and imminent threat and require immediate assistance. - D) Sent by a pilot or an aircraft operating agency which have an imminent meaning for aircraft in flight. **Correct: C)** > **Explanation:** A distress situation — signaled by the phrase MAYDAY (spoken three times) — exists when an aircraft or its occupants face a grave and imminent danger requiring immediate assistance. This is the highest priority category of aeronautical communication. The transponder code 7700 is squawked to alert radar services. Urgency (PAN PAN) is the next level down, involving a serious but not immediately life-threatening condition. ### Q14: Urgency messages are messages... ^q14 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^q14)* - A) Sent by a pilot or an aircraft operating agency which have an imminent meaning for aircraft in flight - B) Concerning aircraft and their passengers which face a grave and imminent threat and require immediate assistance. - C) Concerning the operation or maintenance of facilities essential for the safety or regularity of aircraft operation. - D) Concerning the operation or maintenance of facilities essential for the safety or regularity of aircraft operation. **Correct: D)** > **Explanation:** An urgency message (PAN PAN, spoken three times) concerns a serious condition that requires timely assistance but does not yet pose a grave and imminent danger. Examples include medical situations, engine problems that are controllable, or a pilot who is uncertain of position. Urgency ranks below distress (MAYDAY) but above all routine traffic in priority. ### Q15: Regularity messages are messages... ^q15 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^q15)* - A) Concerning aircraft and their passengers which face a grave and imminent threat and require immediate assistance - B) Sent by an aircraft operating agency or an aircraft of immediate concern to an aircraft in flight. - C) Concerning the safety of an aircraft, a watercraft or some other vehicle or person in sight. - D) Concerning the operation or maintenance of facilities essential for the safety or regularity of aircraft operation. **Correct: D)** > **Explanation:** Regularity messages relate to the operation and maintenance of facilities necessary for flight operations — essentially administrative and logistical communications. They carry the lowest priority in the ICAO message hierarchy, below distress, urgency, flight safety, meteorological, and NOTAM messages. They should never delay safety-critical transmissions. ### Q16: Which of the following messages has the highest priority? ^q16 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^q16)* - A) Turn left - B) Wind 300 degrees, 5 knots - C) Request QDM - D) QNH 1013 **Correct: C)** > **Explanation:** A request for QDM (magnetic heading to steer to reach a station) implies the pilot may be uncertain of position or unable to navigate independently — making it a potential urgency or flight safety matter. Among the options listed, it carries the highest priority because it relates to navigation assistance and pilot safety. Wind and QNH information are routine, while "Turn left" is a standard ATC instruction. ### Q17: What is the correct way to transmit the call sign HB-YKM? ^q17 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^q17)* - A) Hotel Bravo Yuliett Kilo Mikro - B) Home Bravo Yuliett Kilo Mike - C) Hotel Bravo Yankee Kilo Mike - D) Home Bravo Yankee Kilo Mikro **Correct: C)** > **Explanation:** The ICAO phonetic alphabet specifies exact words for each letter. Y is always "Yankee" (not "Yuliett" — that is J), and M is "Mike" (not "Mikro"). H is "Hotel" and B is "Bravo." Using the correct phonetic words is essential to avoid confusion, particularly between letters that sound similar in noisy radio conditions. ### Q18: What is the correct way to transmit the call sign OE-JVK? ^q18 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^q18)* - A) Omega Echo Jankee Victor Kilo - B) Omega Echo Juliett Victor Kilogramm - C) Oscar Echo Jankee Victor Kilogramm - D) Oscar Echo Juliett Victor Kilo **Correct: D)** > **Explanation:** O is "Oscar" (not "Omega"), J is "Juliett" (not "Jankee"), and K is "Kilo" (never "Kilogramm"). The ICAO phonetic alphabet uses standardized English-based words chosen for their intelligibility across different languages. Using non-standard alternatives such as "Omega" or "Jankee" can cause confusion and is not permitted in standard radio communications. ### Q19: An altitude of 4500 ft is transmitted as... ^q19 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^q19)* - A) Four five tousand. - B) Four five zero zero. - C) Four tousand five zero zero. - D) Four tousand five hundred. **Correct: D)** > **Explanation:** ICAO phraseology for altitudes uses the words "thousand" and "hundred" where applicable. 4500 ft is correctly spoken as "four thousand five hundred." Digit-by-digit recitation (e.g., "four five zero zero") is used for QNH and transponder codes, not for altitudes. The word "tousand" in the distractors also represents a common non-standard pronunciation to avoid. ### Q20: A heading of 285 degrees is correctly transmitted as... ^q20 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^q20)* - A) Two hundred eighty-five. - B) Two eight five hundred. - C) Two eight five. - D) Two hundred eight five. **Correct: C)** > **Explanation:** Headings and bearings are always transmitted as three individual digits, each spoken separately: "two eight five." The words "hundred" or "thousand" are not used for headings. This digit-by-digit method prevents any ambiguity — "two eight five" can only mean 285 degrees, whereas "two hundred eighty-five" could theoretically be misheard. ### Q21: A frequency of 119.500 MHz is correctly transmitted as... ^q21 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^q21)* - A) One one niner decimal five zero. - B) One one niner decimal five zero zero. - C) One one niner decimal five. - D) One one niner tousand decimal five zero. **Correct: C)** > **Explanation:** Radio frequencies are transmitted digit by digit with "decimal" for the decimal point, and trailing zeros are dropped. 119.500 MHz is therefore "one one niner decimal five." Note that "niner" is used for 9 to avoid confusion with the German/Dutch "nein" (no). Only significant digits after the decimal are spoken; ".500" reduces to ".5." ### Q22: The directional information "12 o'clock" is correctly transmitted as... ^q22 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^q22)* - A) One two. - B) Twelve o'clock. - C) One two hundred. - D) One two o'clock **Correct: B)** > **Explanation:** Clock position references used to report traffic or terrain are always spoken as a natural number followed by "o'clock": "twelve o'clock" means directly ahead. This is a standard phraseology format used worldwide for traffic advisories. Omitting "o'clock" (saying just "twelve") could be confused with other numerical data, so the full expression is required. ### Q23: Times are transmitted as... ^q23 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^q23)* - A) Local time. - B) Time zone time. - C) UTC. - D) Standard time. **Correct: C)** > **Explanation:** All aeronautical communications use UTC (Coordinated Universal Time), previously known as GMT or Zulu time. This ensures consistency across time zones and eliminates ambiguity in international operations. Pilots must convert local time to UTC when filing flight plans or making ATC reports, and controllers always issue times in UTC. ### Q24: If there is any doubt about ambiguity, a time of 1620 is to be transmitted as... ^q24 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^q24)* - A) Sixteen twenty - B) Two zero. - C) One six two zero. - D) One tousand six hundred two zero **Correct: C)** > **Explanation:** When transmitting times and there is any risk of ambiguity (e.g., confusion about whether only minutes or the full time is meant), ICAO requires the full four-digit UTC time spoken as individual digits: "one six two zero." This removes any doubt about whether "twenty" refers to 1620 or 0020. Abbreviated times (just minutes) are only acceptable when the hour is clearly established. ### Q25: What is the meaning of the phrase "Roger"? ^q25 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^q25)* - A) An error has been made in this transmission. The correct version is... - B) Permission for proposed action is granted - C) I understand your message and will comply with it - D) I have received all of your last transmission **Correct: D)** > **Explanation:** "Roger" means "I have received all of your last transmission" — it is a receipt acknowledgement only, not a commitment to comply. It must not be used where readback of specific instructions is required (such as clearances, headings, or squawk codes). Pilots sometimes confuse "Roger" with "Wilco" (will comply) — the distinction is important for ATC communication integrity. ### Q26: What is the meaning of the phrase "Correction"? ^q26 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^q26)* - A) I have received all of your last transmission - B) I understand your message and will comply with it - C) Permission for proposed action is granted - D) An error has been made in this transmission. The correct version is... **Correct: D)** > **Explanation:** "Correction" is used mid-transmission when a pilot or controller realizes they have made an error. The word is spoken, then the correct information follows immediately. This prevents the receiving party from acting on faulty data. It is distinct from "Negative" (which corrects a wrong assumption) and avoids the ambiguity of simply restarting a sentence. ### Q27: What is the meaning of the phrase "Approved"? ^q27 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^q27)* - A) I understand your message and will comply with it - B) Permission for proposed action is granted - C) I have received all of your last transmission - D) An error has been made in this transmission. The correct version is... **Correct: B)** > **Explanation:** "Approved" grants permission for a specific action that the pilot has proposed or requested. For example, a pilot requesting "request backtrack runway 27" may receive "Approved." It is synonymous with "Cleared" in some contexts but specifically responds to a pilot's proposal. "Wilco" (answer A) is the pilot's response indicating they will comply with an instruction already given. ### Q28: Which phrase does a pilot use when he / she wants to check the readability of his / her transmission? ^q28 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^q28)* - A) Request readability - B) What is the communication like? - C) You read me five - D) How do you read? **Correct: D)** > **Explanation:** "How do you read?" is the standard ICAO phrase used to request a readability check from the receiving station. The expected response uses the readability scale from 1 (unreadable) to 5 (perfectly readable), e.g., "I read you five." This phrase is used when the pilot suspects their transmission quality may be poor, such as after changing frequency or noting interference. ### Q29: Which phrase is used by a pilot when he wants to fly through controlled airspace? ^q29 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^q29)* - A) Want - B) Apply - C) Would like - D) Request **Correct: D)** > **Explanation:** "Request" is the standard ICAO phraseology term for when a pilot wishes to obtain a clearance, service, or permission. Colloquial alternatives such as "I want" or "I would like" are not standard phraseology. For example: "Dusseldorf Radar, D-EAZF, request transit controlled airspace." Using standardized vocabulary reduces the risk of misunderstanding, particularly in high-workload or multilingual environments. ### Q30: What phrase is used by a pilot if a transmission is to be answered with "yes"? ^q30 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^q30)* - A) Affirm - B) Yes - C) Affirmative - D) Roger **Correct: A)** > **Explanation:** "Affirm" is the standard ICAO word for yes. "Affirmative" is common in military communications but "Affirm" is the correct civil aviation standard. The word "Yes" is not part of standard phraseology and should be avoided as it can be misheard. "Roger" means message received, not agreement, and must not be confused with "Affirm." ### Q31: What phrase is used by a pilot if a transmission is to be answered with "no"? ^q31 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^q31)* - A) Negative - B) No - C) Not - D) Finish **Correct: A)** > **Explanation:** "Negative" is the standard ICAO phraseology for "no" or "that is not correct." It is unambiguous and internationally understood. The plain word "No" is not standard phraseology and is avoided because it may be misheard or misunderstood across language barriers. "Negative" also serves to correct an incorrect assumption made by the other party. ### Q32: Which phrase is to be used when a pilot wants the tower to know that he is ready for take-off? ^q32 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^q32)* - A) Ready for departure - B) Request take-off - C) Ready for start-up - D) Ready **Correct: A)** > **Explanation:** "Ready for departure" is the standard phrase indicating the aircraft is at the holding point and prepared to take off. Note that the word "take-off" is only ever used in the actual clearance ("Cleared for take-off") or its cancellation ("Cancel take-off clearance") — pilots say "departure" for all other references to avoid premature action on a misheard word. "Ready" alone is incomplete and non-standard. ### Q33: What phrase is used by a pilot to inform the tower about a go-around? ^q33 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^q33)* - A) Pulling up - B) Going around - C) No landing - D) Approach canceled **Correct: B)** > **Explanation:** "Going around" is the standard ICAO phrase used by a pilot to notify ATC that they are discontinuing an approach and initiating a missed approach or go-around. It must be transmitted immediately when the decision is made, before any other communication. ATC will then provide instructions (e.g., runway heading, altitude to maintain). Non-standard alternatives like "no landing" or "approach canceled" are not recognized phraseology. ### Q34: What is the call sign of the aerodrome control? ^q34 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^q34)* - A) Ground - B) Control - C) Tower - D) Airfield **Correct: C)** > **Explanation:** The aerodrome control unit — responsible for aircraft on the runway and in the immediate circuit area — uses the call sign suffix "Tower" (e.g., "Dusseldorf Tower"). This distinguishes it from ground movement control ("Ground"), approach control ("Approach" or "Radar"), and area control ("Control"). Glider pilots operating at controlled aerodromes must contact the correct unit using the appropriate call sign. ### Q35: What is the call sign of the surface movement control? ^q35 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^q35)* - A) Control - B) Tower - C) Earth - D) Ground **Correct: D)** > **Explanation:** Surface movement control — responsible for the movement of aircraft and vehicles on the manoeuvring area (taxiways, aprons) other than the runway — uses the call sign suffix "Ground" (e.g., "Frankfurt Ground"). At smaller aerodromes, the tower may handle both functions on a single frequency, but at larger airports these are separated. Pilots should not taxi without clearance from Ground. ### Q36: What is the call sign of the flight information service? ^q36 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^q36)* - A) Flight information - B) Info - C) Advice - D) Information **Correct: D)** > **Explanation:** FIS units use the call sign suffix "Information" (e.g., "Langen Information" or "Scottish Information"). This service provides traffic information, weather updates, and other advisories to VFR pilots operating outside controlled airspace. Glider pilots frequently use FIS frequencies during cross-country flights and must identify the unit using the correct call sign suffix. ### Q37: What is the correct abbreviation of the call sign D-EAZF? ^q37 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^q37)* - A) AZF - B) DZF - C) DEA - D) DEF **Correct: B)** > **Explanation:** When abbreviating a five-character civil aircraft call sign, ICAO standard procedure uses the first character (nationality prefix) plus the last two characters: D-EAZF becomes D-ZF, spoken as "Delta Zulu Foxtrot" or simply "DZF." This abbreviated form may only be used after the ground station has itself used the abbreviation — establishing that both parties have unambiguously identified the aircraft. ### Q38: In what case is the pilot allowed to abbreviate the call sign of his aircraft? ^q38 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^q38)* - A) After passing the first reporting point - B) If there is little traffic in the traffic circuit - C) Within controlled airspace - D) After the ground station has used the abbreviation **Correct: D)** > **Explanation:** The pilot may only begin using the abbreviated call sign once the ground station has used it first. This rule ensures that identification is unambiguous — the controller has confirmed which aircraft they are communicating with before the shortened form is adopted. Self-initiated abbreviation can lead to confusion if multiple aircraft with similar endings are on frequency. ### Q39: What is the correct way of using the aircraft call sign at first contact? ^q39 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^q39)* - A) Using the last two characters only - B) Using all characters - C) Using the first three characters only - D) Using the first two characters only **Correct: B)** > **Explanation:** At first contact with any ATC unit, the pilot must use the full aircraft call sign (e.g., D-EAZF in full as "Delta Echo Alfa Zulu Foxtrot"). This allows the controller to positively identify the aircraft before any abbreviation is established. Using a partial call sign at first contact risks confusion with other aircraft and is contrary to ICAO standard procedures. ### Q40: What is the correct way of establishing radio communication between D-EAZF and Dusseldorf Tower? ^q40 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^q40)* - A) Dusseldorf Tower over - B) Dusseldorf Tower D-EAZF - C) Dusseldorf Tower D-EAZF - D) Tower from D-EAZF **Correct: B)** > **Explanation:** The standard format for initial contact is: station called, then own call sign — "Dusseldorf Tower, Delta Echo Alfa Zulu Foxtrot." The word "Over" is optional at the end of a transmission but not required for initial calls. The format "Tower from D-EAZF" is non-standard and should be avoided. The station is addressed first so they know to listen, then the calling aircraft identifies itself. ### Q41: What does a readability of 1 indicate? ^q41 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^q41)* - A) The transmission is readable but with difficulty - B) The transmission is perfectly readable - C) The transmission is readable now and then - D) The transmission is unreadable **Correct: D)** > **Explanation:** The ICAO readability scale runs from 1 to 5: 1 = Unreadable, 2 = Readable now and then, 3 = Readable but with difficulty, 4 = Readable, 5 = Perfectly readable. A readability of 1 means the receiving station cannot understand the transmission at all. If a pilot receives a readability 1 report, they should consider changing frequency, transmitter power, or antenna position. ### Q42: What does a readability of 2 indicate? ^q42 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^q42)* - A) The transmission is readable but with difficulty - B) The transmission is unreadable - C) The transmission is perfectly readable - D) The transmission is readable now and then **Correct: D)** > **Explanation:** Readability 2 means the transmission is only intermittently intelligible — the receiving station catches parts of the message but cannot reliably understand it. This might result from atmospheric interference, weak signal, or excessive background noise. In practice, a pilot reporting readability 2 should attempt to improve transmission quality or relay through another aircraft. ### Q43: What does a readability of 3 indicate? ^q43 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^q43)* - A) The transmission is perfectly readable - B) The transmission is readable now and then - C) The transmission is unreadable - D) The transmission is readable but with difficulty **Correct: D)** > **Explanation:** Readability 3 means the transmission is intelligible but requires effort — words may be unclear and the listener must concentrate. This level is often acceptable for short operational messages but is not ideal for complex instructions or clearances. Pilots and controllers should attempt to improve signal quality if readability remains at 3 for extended periods. ### Q44: What does a readability of 5 indicate? ^q44 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^q44)* - A) The transmission is readable now and then - B) The transmission is readable but with difficulty - C) The transmission is unreadable - D) The transmission is perfectly readable **Correct: D)** > **Explanation:** Readability 5 is the best possible signal quality — the transmission is perfectly clear and intelligible. When asked "How do you read?" a response of "I read you five" (or "readability five") indicates ideal communication conditions. Glider pilots should aim for readability 4-5 on all ATC frequencies, particularly when receiving critical instructions such as clearances or emergency guidance. ### Q45: Which information from a ground station does not require readback? ^q45 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^q45)* - A) Runway in use - B) Altitude - C) Wind - D) SSR-Code **Correct: C)** > **Explanation:** Wind information is considered advisory and does not require readback — it is acknowledged with "Roger" or simply absorbed. Items that must be read back include: ATC route clearances, clearances to enter, land on, take off from, cross, or backtrack a runway, runway in use, altimeter settings, SSR codes, level instructions, heading and speed instructions. Wind is not in this safety-critical readback category. ### Q46: Which information from a ground station does not require readback? ^q46 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^q46)* - A) Altimeter setting - B) Traffic information - C) Heading - D) Taxi instructions **Correct: B)** > **Explanation:** Traffic information (e.g., "traffic at your two o'clock, one thousand feet above") is acknowledged with "Roger" or "Traffic in sight" — it does not require a formal readback. In contrast, altimeter settings, headings, and taxi instructions are all subject to mandatory readback requirements under ICAO procedures, as errors in these items can have direct safety consequences. ### Q47: What is the correct way of acknowledging the instruction "DZF after lift-off climb straight ahead until 2500 feet before turning right heading 220 degrees, wind 090 degrees, 5 knots, runway 12, cleared for take-off"? ^q47 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^q47)* - A) DZF after lift-off climb straight ahead 2500 feet, then turn right heading 220, 090 degrees, 5 knots - B) DZF after lift-off climb straight ahead 2500 feet, then turn right heading 220, 090 degrees, 5 knots, cleared for take-off - C) DZF after lift-off climb straight ahead 2500 feet, wilco, heading 220 degrees, 090 degrees, 5 knots, cleared for take-off - D) DZF after lift-off climb straight ahead 2500 feet, then turn right heading 220, runway 12, cleared for take-off **Correct: D)** > **Explanation:** The readback must include all safety-critical items: departure instructions (climb straight ahead to 2500 ft, turn right heading 220), runway in use (runway 12), and the take-off clearance. Wind information does not require readback and is correctly omitted. Option B incorrectly reads back the wind, and option C uses "wilco" inappropriately mid-readback. The runway and clearance phrase must be included. ### Q48: What is the correct way of acknowledging the instruction "Next report PAH"? ^q48 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^q48)* - A) Positive - B) Wilco - C) Report PAH - D) Roger **Correct: B)** > **Explanation:** "Wilco" (from "will comply") is the correct response when a pilot understands and intends to comply with an instruction. "Next report PAH" is an instruction requiring future action, so "Wilco" confirms both receipt and intention to comply. "Roger" only confirms receipt without implying compliance. "Positive" is not standard phraseology in this context. ### Q49: What is the correct way of acknowledging the instruction "Squawk 4321, Call Bremen Radar on 131.325"? ^q49 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^q49)* - A) Roger - B) Squawk 4321, 131.325 - C) Squawk 4321, wilco - D) Wilco **Correct: B)** > **Explanation:** SSR transponder codes (squawk codes) and frequency changes must be read back — they are safety-critical items. The pilot must read back the squawk code (4321) and the new frequency (131.325) to confirm correct receipt. "Roger" alone or "Wilco" alone is insufficient. If the wrong code is set or the wrong frequency dialled, both situations carry serious safety implications. ### Q50: What is the correct way of acknowledging "You are now entering airspace Delta"? ^q50 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^q50)* - A) Roger - B) Airspace Delta - C) Wilco - D) Entering **Correct: A)** > **Explanation:** "You are now entering airspace Delta" is an informational statement from ATC — it describes what is happening, not an instruction requiring future action. "Roger" (I have received your message) is therefore the correct and sufficient response. "Wilco" would imply a future action to comply with, which is inappropriate here. No readback of the airspace type is required for a pure information message. ## BAZL/OFAC — Series 1 Questions ### BAZL Br.90 Q8: A pilot sends the following message to ATC: "We are landing at 10:45. Please order us a taxi." What type of message is this? ^bazl_90_8 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^bazl_90_8)* > *Source: BAZL/OFAC Serie 1 - Branches Communes* - A) It is an inadmissible message. - B) It is a message relating to the regularity of flights. - C) It is a service message. - D) It is an urgency message. **Correct: A)** > **Explanation:** ATC frequencies must not be used for personal requests (taxi). Such a message is inadmissible because it monopolizes a frequency reserved for aeronautical communications and does not meet any criteria for flight safety or regularity. ### BAZL Br.90 Q19: You are flying VFR and have received ATC clearance to enter Class C airspace in order to land. Shortly after entering this airspace, your radio fails. What do you do if no other special provisions apply? ^bazl_90_19 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^bazl_90_19)* > *Source: BAZL/OFAC Serie 1 - Branches Communes* - A) You set the transponder to code 7600, continue in accordance with the last clearance and follow light signals from the control tower. - B) Regardless of the clearance obtained, you are no longer authorized to fly in this airspace. You set the transponder to code 7600, leave the airspace as quickly as possible and land at the nearest suitable aerodrome. - C) By virtue of the clearance issued, you have the right to fly in Class C airspace and land there. You only need to set the transponder to code 7700. - D) You must head to the alternate aerodrome by the most direct route and set the transponder to code 7000. **Correct: B)** > **Explanation:** In VFR flight, radio is mandatory in Class C airspace. Without radio, the previously obtained clearance is insufficient — the pilot must set the transponder to code 7600 (radio failure), leave the controlled airspace as quickly as possible and land at the nearest suitable aerodrome. ### BAZL Br.90 Q4: Through which channel can you obtain in-flight routine aviation meteorological observations (METAR) for several specific airports? ^bazl_90_4 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^bazl_90_4)* > *Source: BAZL/OFAC Serie 1 - Branches Communes* - A) Via GAMET. - B) Via VOLMET. - C) Via SIGMET. - D) Via AIRMET. **Correct: B)** > **Explanation:** VOLMET is the continuous radio broadcast service for METARs and TAFs for several aerodromes. It allows pilots in flight to obtain real-time meteorological observations for their destination and alternate aerodromes. SIGMET and AIRMET relate to significant meteorological phenomena over a region, not observations for specific aerodromes. ### BAZL Br.90 Q11: What does the abbreviation QNH mean? ^bazl_90_11 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^bazl_90_11)* > *Source: BAZL/OFAC Serie 1 - Branches Communes* - A) The altimeter setting required to read the aerodrome elevation when on the ground. - B) The atmospheric pressure measured at the highest obstacle on the aerodrome. - C) The atmospheric pressure at aerodrome level (or at the runway threshold). - D) The atmospheric pressure measured at a point on the Earth's surface. **Correct: A)** > **Explanation:** QNH is the altimeter setting referenced to mean sea level. When set in the altimeter subscale, the instrument reads aerodrome elevation above mean sea level when on the ground. It is distinct from QFE (pressure at aerodrome level, altimeter reads zero on the ground) and QNE (standard 1013.25 hPa, used in flight level airspace). ### BAZL Br.90 Q5: What does the abbreviation QDM mean? ^bazl_90_5 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^bazl_90_5)* > *Source: BAZL/OFAC Serie 1 - Branches Communes* - A) Magnetic bearing from the radio beacon. - B) Magnetic heading to steer to reach the radio beacon (nil wind). - C) True bearing from the radio beacon. - D) True heading to steer to reach the radio beacon (nil wind). **Correct: B)** > **Explanation:** QDM is the magnetic heading to steer to reach the station (without wind correction). It is distinct from QDR (magnetic bearing from the station) and QTE (true bearing from the station). A request for QDM often indicates that the pilot is trying to orientate — which gives it a potentially urgent character. ### BAZL Br.90 Q13: The radiotelephony distress signal (MAYDAY) or the urgency signal (PAN PAN) must be...? ^bazl_90_13 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^bazl_90_13)* > *Source: BAZL/OFAC Serie 1 - Branches Communes* - A) spoken once. - B) spoken twice. - C) spoken three times. - D) spoken four times. **Correct: C)** > **Explanation:** The distress phrase "MAYDAY MAYDAY MAYDAY" or the urgency phrase "PAN PAN PAN PAN PAN PAN" — the key word is repeated three times. This repetition is required by ICAO to ensure that the nature of the message is clearly identified even in poor radio conditions or with partial interference. ### BAZL Br.90 Q16: What information should, where possible, be included in an urgency message? ^bazl_90_16 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^bazl_90_16)* > *Source: BAZL/OFAC Serie 1 - Branches Communes* - A) The identification and type of aircraft, the nature of the emergency, the intentions of the flight crew, and the position, level and heading of the aircraft. - B) The identification and type of aircraft, the assistance required, the route, the destination aerodrome. - C) The identification of the aircraft, the departure aerodrome, the position, level and heading of the aircraft. - D) The identification of the aircraft, its position and level, the nature of the emergency, the assistance required. **Correct: A)** > **Explanation:** An urgency message (PAN PAN) should, where possible, contain: the identification and type of aircraft, the nature of the emergency, the intentions of the crew, and the position, level and heading of the aircraft. These elements allow ATC services to provide effective assistance and coordinate the necessary resources. ### BAZL Br.90 Q10: What is the correct order of priority for messages in the aeronautical mobile service? ^bazl_90_10 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^bazl_90_10)* > *Source: BAZL/OFAC Serie 1 - Branches Communes* - A) 1. Flight safety messages, 2. Distress messages, 3. Urgency messages. - B) 1. Distress messages, 2. Urgency messages, 3. Flight safety messages. - C) 1. Distress messages, 2. Flight safety messages, 3. Urgency messages. - D) 1. Urgency messages, 2. Distress messages, 3. Flight safety messages. **Correct: B)** > **Explanation:** The order of priority in the aeronautical mobile service is: 1. Distress messages (MAYDAY), 2. Urgency messages (PAN PAN), 3. Flight safety messages. Meteorological messages (SIGMET, etc.) and then regularity messages follow. This order ensures that life-threatening situations are always addressed first. ### BAZL Br.90 Q20: How are the letters BAFO spelled in the ICAO phonetic alphabet? ^bazl_90_20 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^bazl_90_20)* > *Source: BAZL/OFAC Serie 1 - Branches Communes* - A) BRAVO ALPHA FOXTROT OTTO - B) BRAVO ANNA FOX OSCAR - C) BETA ALPHA FOXTROT OSCAR - D) BRAVO ALPHA FOXTROT OSCAR **Correct: D)** > **Explanation:** The standard ICAO phonetic alphabet: B = Bravo, A = Alpha, F = Foxtrot, O = Oscar. Alternatives such as "Otto", "Anna", "Fox" or "Beta" are non-standard local variants that must not be used in international aeronautical communications. ### BAZL Br.90 Q1: You are piloting your aircraft on a north-easterly heading at 2,500 feet. What do you reply to air traffic control when it asks for your position? ^bazl_90_1 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^bazl_90_1)* > *Source: BAZL/OFAC Serie 1 - Branches Communes* - A) Heading 045 at 2,500 feet. - B) Heading 045 at flight level 25. - C) Heading 45 at 2,500 feet. - D) 045 degrees and 2,500 feet. **Correct: A)** > **Explanation:** The correct format for transmitting a position/heading is: "Heading" followed by three digits (always three, so "045" not "45"), then the altitude in feet when below the transition altitude. Flight level (FL) is only used above the transition altitude. The format "045 degrees and 2,500 feet" mixes the degree symbol and conjunction, which are not part of standard phraseology. ### BAZL Br.90 Q18: For which frequency range do radio waves travel the greatest distance? ^bazl_90_18 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^bazl_90_18)* > *Source: BAZL/OFAC Serie 1 - Branches Communes* - A) MW - B) LW - C) VHF - D) UHF **Correct: B)** > **Explanation:** Long waves (LW / LF, Low Frequency) travel the greatest distance because they diffract around the curvature of the Earth. VHF and UHF waves used in aviation for radio communications propagate by line of sight and are therefore limited by the radio horizon distance. Medium waves (MW) have an intermediate range. ### BAZL Br.90 Q15: What abbreviation designates the universal time system used by air navigation services? ^bazl_90_15 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^bazl_90_15)* > *Source: BAZL/OFAC Serie 1 - Branches Communes* - A) UTC - B) LT - C) GMT - D) LMT **Correct: A)** > **Explanation:** UTC (Coordinated Universal Time) is the time standard used in international aviation. Although GMT (Greenwich Mean Time) is historically similar, UTC is the official designation adopted by ICAO. LT (Local Time) and LMT (Local Mean Time) are not used in official aeronautical communications and publications. ### BAZL Br.90 Q2: During radio communications, speech should be maintained at as steady a rate as possible. According to ICAO, what is the recommended speaking rate? ^bazl_90_2 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^bazl_90_2)* > *Source: BAZL/OFAC Serie 1 - Branches Communes* - A) 50 words/minute. - B) 100 words/minute. - C) 150 words/minute. - D) 200 words/minute. **Correct: B)** > **Explanation:** ICAO recommends a speaking rate of approximately 100 words per minute for radio communications. An excessively high rate reduces intelligibility, especially in degraded radio conditions or for interlocutors whose first language is not English. A steady, moderate rate facilitates understanding and reduces the risk of miscommunication. ### BAZL Br.90 Q14: Which of the following statements concerning radiotelephony in the aeronautical mobile service is correct? ^bazl_90_14 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^bazl_90_14)* > *Source: BAZL/OFAC Serie 1 - Branches Communes* - A) In principle, use plain language as it is most understandable. Standard phraseology may only be used in connection with ATC clearances. - B) It does not matter whether ICAO standard phraseology or plain language is used, provided the message is understandable. - C) ICAO standard phraseology should in principle be used to avoid misunderstandings. Plain language is to be used only in situations for which there is no corresponding standard phraseology. - D) In communications with ATC, use exclusively ICAO standard phraseology. Plain language is only permitted at uncontrolled aerodromes. **Correct: C)** > **Explanation:** ICAO standard phraseology is the norm in aeronautical radiotelephony — it reduces the risk of misunderstandings and ensures mutual understanding in a multilingual environment. Plain language is only permitted for situations that have no corresponding standard phraseology. Option D is too restrictive: plain language remains permissible in certain contexts even in controlled airspace. ### BAZL Br.90 Q7: What is the correct English term for "service d'information de vol d'aérodrome"? ^bazl_90_7 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^bazl_90_7)* > *Source: BAZL/OFAC Serie 1 - Branches Communes* - A) AERODROME INFORMATION SERVICE - B) AIRPORT TRAFFIC INFORMATION SERVICE - C) FLIGHT INFORMATION SERVICE - D) AERODROME FLIGHT INFORMATION SERVICE **Correct: D)** > **Explanation:** AFIS (Aerodrome Flight Information Service) is the flight information service specific to an aerodrome. It provides pilots with information about aerodrome activity (wind, runway in use, known traffic) but is not a control service — AFIS does not issue clearances. It is distinct from FIS (Flight Information Service) which covers a larger region. ### BAZL Br.90 Q17: What is the correct abbreviated call sign for an aircraft whose full call sign is AB-CDE? ^bazl_90_17 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^bazl_90_17)* > *Source: BAZL/OFAC Serie 1 - Branches Communes* - A) CDE - B) AB-DE - C) A-DE - D) DE **Correct: C)** > **Explanation:** The abbreviation rule for five-character civil aircraft call signs retains the first letter (nationality prefix) and the last two characters: AB-CDE becomes A-DE. This rule applies in the same way as for D-EAZF becoming D-ZF. Abbreviation is only permitted after the ground station has used it first. ### BAZL Br.90 Q9: When is a pilot permitted to use an abbreviated call sign? ^bazl_90_9 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^bazl_90_9)* > *Source: BAZL/OFAC Serie 1 - Branches Communes* - A) After the first call. - B) At any time provided there is no risk of confusion. - C) Never. Only the air navigation service has the right to abbreviate the call sign. - D) If the ground station communicates in this way. **Correct: D)** > **Explanation:** The pilot may abbreviate their call sign only after the ground station has done so first. The initiative to abbreviate always belongs to the controller or ground operator. If the ground station has not abbreviated the call sign, the pilot must use the full call sign. ### BAZL Br.90 Q12: Which instructions and information must always be read back? ^bazl_90_12 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^bazl_90_12)* > *Source: BAZL/OFAC Serie 1 - Branches Communes* - A) Surface wind, runway in use, altimeter settings, level instructions, SSR codes. - B) Runway in use, visibility, surface wind, heading instructions, altimeter settings. - C) Surface wind, visibility, temperature, runway in use, altimeter settings, heading and speed instructions. - D) Runway in use, altimeter settings, SSR codes, level instructions, heading and speed instructions. **Correct: D)** > **Explanation:** The items that must always be read back are: runway in use, altimeter settings, SSR codes (transponder), level instructions (altitude/FL), and heading and speed instructions. Surface wind and visibility are advisory information that do not require a read-back. This list corresponds exactly to the ICAO/EASA requirements for VFR operations. ### BAZL Br.90 Q6: What does the instruction "Squawk ident" mean to you? ^bazl_90_6 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^bazl_90_6)* > *Source: BAZL/OFAC Serie 1 - Branches Communes* - A) You must press the "IDENT" button on your transponder. - B) You must make a turn to identify yourself. - C) You must re-enter the transponder code that has been assigned to you. - D) You have been identified by radar. **Correct: A)** > **Explanation:** "Squawk ident" is the controller's instruction asking the pilot to press the IDENT button on their transponder. This generates a special signal on the radar display that makes the aircraft's symbol blink or stand out, allowing the controller to identify it quickly among surrounding traffic. Identification is confirmed by the controller with "Identified" or "Squawk confirmed." ### BAZL Br.90 Q3: How does a pilot end the read-back of an ATC clearance? ^bazl_90_3 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^bazl_90_3)* > *Source: BAZL/OFAC Serie 1 - Branches Communes* - A) With "ROGER". - B) With "WILCO". - C) With the call sign of the ATC ground station. - D) With the call sign of their aircraft. **Correct: D)** > **Explanation:** The read-back of an ATC clearance always ends with the call sign of the aircraft. This allows the controller to confirm unambiguously which aircraft has received and repeated the clearance. Ending with the call sign of the ground station would be a procedural error. "Roger" and "Wilco" may appear in the response but do not replace the final aircraft identification. --- ## Series 2 — FOCA/BAZL Mock Exam ### BAZL 901 Q1 — In which category can messages from an aircraft in a state characterized by a serious and/or imminent danger requiring immediate assistance be classified? ^bazl_901_1 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^bazl_901_1)* - A) Messages concerning flight safety. - B) Messages concerning flight regularity. - C) Urgency messages. - D) Distress messages. **Correct: D)** > **Explanation:** An aircraft in a distress situation transmits distress messages. Distress implies a serious and imminent danger requiring immediate assistance (ICAO Annex 10). ### BAZL 901 Q2 — From what point may an aircraft use its abbreviated callsign? ^bazl_901_2 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^bazl_901_2)* - A) When there is no possibility of confusion. - B) Once communication is well established. - C) In case of heavy traffic. - D) When the aeronautical station has used the abbreviated callsign when addressing the aircraft. **Correct: B)** > **Explanation:** An aircraft may use its abbreviated callsign once radio communication is well established with the ground station, and only after the ground station has itself used the abbreviated callsign first. ### BAZL 901 Q3 — An aircraft fails to establish radio contact with a ground station on either the designated frequency or any other appropriate frequency. What action must the pilot take? ^bazl_901_3 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^bazl_901_3)* - A) Display SSR emergency code 7500. - B) Try to establish communication with other aircraft or other aeronautical stations. - C) Land at the nearest aerodrome on route. - D) Proceed to the alternate aerodrome. **Correct: B)** > **Explanation:** If an aircraft fails to establish contact, it should try to establish communication with other aircraft or stations that could relay the message. Code 7500 is for hijacking, not radio failure. ### BAZL 901 Q4 — In the aeronautical mobile service, which of the following frequencies is an international distress frequency? ^bazl_901_4 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^bazl_901_4)* - A) 6500 KHz. - B) 121.500KHz. - C) 121.500MHz. - D) 123.45MHz. **Correct: C)** > **Explanation:** The international VHF distress frequency is 121.500 MHz. (121.500 KHz would be HF, not VHF). This is the universal guard frequency. ### BAZL 901 Q5 — How must the letters NDGF be pronounced according to the ICAO phonetic alphabet? ^bazl_901_5 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^bazl_901_5)* - A) NOVEMBER DELTA GAMMA FOX. - B) NOVEMBER DECEMBER GOLF FOXTROT - C) NORBERT DELTA GOLF FOX. - D) NOVEMBER DELTA GOLF FOXTROT. **Correct: D)** > **Explanation:** According to ICAO phonetic alphabet: N = NOVEMBER, D = DELTA, G = GOLF, F = FOXTROT. Answer (d) is correct. ### BAZL 901 Q6 — What does the term "aeronautical station" mean? ^bazl_901_6 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^bazl_901_6)* - A) A radio station of the aeronautical fixed service, on the ground or on board an aircraft, intended for the exchange of radio communications. - B) Any radio station intended for the exchange of radio communications. - C) A radio station of the aeronautical fixed service. - D) A land station of the aeronautical mobile service. In certain cases, an aeronautical station may be located on board a ship or offshore platform. **Correct: D)** > **Explanation:** An aeronautical station is a ground station of the aeronautical mobile service. It can provide communication services to aircraft in flight. ### BAZL 901 Q7 — What does the abbreviation "HJ" mean? ^bazl_901_7 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^bazl_901_7)* - A) Continuous day and night service. - B) From sunrise to sunset. - C) No fixed operating hours. - D) From sunset to sunrise. **Correct: B)** > **Explanation:** HJ means 'from sunrise to sunset' (from French: Heure de Jour). It is the standard ICAO abbreviation used in AIPs and NOTAMs. ### BAZL 901 Q8 — Which instructions and information must always be read back verbatim? ^bazl_901_8 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^bazl_901_8)* - A) Surface wind, runway in use, altimeter settings, level instructions, SSR codes. - B) Runway in use, visibility, surface wind, heading instructions, altimeter settings. - C) Surface wind, visibility, temperature, runway in use, altimeter settings, heading and speed instructions. - D) Runway in use, altimeter settings, level instructions, SSR codes, heading and speed instructions. **Correct: A)** > **Explanation:** ATIS (Automatic Terminal Information Service) always contains: surface wind, runway in use, altimeter settings, and transition level information. These are the essential elements defined by ICAO. ### BAZL 901 Q9 — In which message category can ATC clearances, take-off and landing clearances, traffic information, etc. from the air traffic control service be classified? ^bazl_901_9 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^bazl_901_9)* - A) Messages concerning flight regularity. - B) Messages concerning flight safety. - C) Urgency messages. **Correct: B)** > **Explanation:** ATC clearances, instructions, and weather information are messages concerning flight safety. They have high priority in the aeronautical message hierarchy. ### BAZL 901 Q10 — What does the instruction "Squawk 1234" mean? ^bazl_901_10 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^bazl_901_10)* - A) Set code 1234 on the transponder and switch it to ON. - B) Transmit briefly (1-2-3-4) for a bearing. - C) Conduct a radio check on frequency 123.4 MHz. - D) Be ready to monitor frequency 123.4 MHz. **Correct: A)** > **Explanation:** The instruction 'Squawk 1234' means: set code 1234 on the transponder and activate the appropriate mode (mode C or mode S depending on equipment). ### BAZL 901 Q11 — What does the abbreviation "ATIS" stand for? ^bazl_901_11 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^bazl_901_11)* - A) Airport Terminal Information Service - B) Automatic Terminal Information Service - C) Automatic Terminal Information System - D) Air Trafic Information Service **Correct: B)** > **Explanation:** ATIS stands for 'Automatic Terminal Information Service'. It is the looping recording of meteorological and operational information for an aerodrome. ### BAZL 901 Q12 — What is the call sign of the Flight Information Service? ^bazl_901_12 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^bazl_901_12)* - A) AERODROME. - B) FLIGHT CENTER - C) INFORMATION. - D) INFO **Correct: C)** > **Explanation:** The call sign of the Flight Information Service is 'INFORMATION'. Example: 'Geneva Information' or 'Zurich Information'. ### BAZL 901 Q13 — What does the term "QDR" mean? ^bazl_901_13 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^bazl_901_13)* - A) Magnetic bearing from the station - B) True bearing from the station - C) Magnetic heading to the station (zero wind) - D) True heading to the station (zero wind) **Correct: A)** > **Explanation:** QDR means the magnetic bearing from the station to the aircraft (magnetic bearing FROM station). Not to be confused with QDM (magnetic bearing TO the station). ### BAZL 901 Q14 — What influences the reception quality of VHF (very high frequency) radio? ^bazl_901_14 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^bazl_901_14)* - A) The ionosphere. - B) Flight altitude and topographical conditions. - C) Atmospheric disturbances, in particular thunderstorm conditions. - D) The twilight effect. **Correct: B)** > **Explanation:** VHF reception quality depends mainly on flight altitude (line-of-sight range) and topographical conditions (terrain between transmitter and receiver). The ionosphere does not affect VHF. ### BAZL 901 Q15 — What does the term "QFE" mean? ^bazl_901_15 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^bazl_901_15)* - A) Atmospheric pressure measured at the height of the highest obstacle on an aerodrome. - B) Atmospheric pressure at the aerodrome elevation (or runway threshold). - C) Atmospheric pressure measured at a point on the earth’s surface. - D) Altimeter setting that causes the instrument to indicate the aerodrome elevation on the ground. **Correct: B)** > **Explanation:** QFE is the atmospheric pressure at the aerodrome elevation (or runway threshold). With QFE set on the altimeter, the instrument shows height above the aerodrome (0 on the ground). ### BAZL 901 Q16 — In the aeronautical mobile service, messages are classified by importance. What is the correct order of priority? ^bazl_901_16 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^bazl_901_16)* - A) Radio direction-finding messages, distress messages, urgency messages. - B) Distress messages, urgency messages, messages concerning safety. - C) Distress messages, messages concerning flight safety, urgency messages. - D) Meteorological messages, radio direction-finding messages, messages concerning flight regularity. **Correct: B)** > **Explanation:** Messages are classified in decreasing priority order: distress messages, urgency messages, messages concerning flight safety, regularity messages, and private messages. ### BAZL 901 Q17 — What is the urgency signal in radiotelephony? ^bazl_901_17 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^bazl_901_17)* - A) URGENCY (preferably spoken three times). - B) MAYDAY (preferably spoken three times). e) ALERFA (preferably spoken three times). - D) PAN PAN (preferably spoken three times). **Correct: D)** > **Explanation:** The urgency signal in radiotelephony is PAN PAN (preferably spoken three times). MAYDAY is the distress signal (imminent danger). PAN PAN indicates a less severe emergency. ### BAZL 901 Q18 — On the readability scale, what does degree "5" mean? ^bazl_901_18 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^bazl_901_18)* - A) Unreadable. - B) Readable, but with difficulty. - C) Perfectly readable. - D) Readable intermittently. **Correct: C)** > **Explanation:** In the ICAO readability scale, degree 5 means 'perfectly readable'. The scale runs from 1 (unreadable) to 5 (perfectly readable). ### BAZL 901 Q19 — What is the name of the time system used worldwide by air traffic services and in the aeronautical fixed service? ^bazl_901_19 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^bazl_901_19)* - A) Coordinated Universal Time (UTC). - B) Local time (LT) using the 24-hour clock. - C) Local time using the AM and PM system. - D) There is no particular time system, as generally only minutes are transmitted. **Correct: A)** > **Explanation:** The universal time system used in aviation is Coordinated Universal Time (UTC), formerly GMT. All flight times, NOTAMs and weather reports are expressed in UTC. ### BAZL 901 Q20 — What elements should a distress message contain? ^bazl_901_20 > *[FR](../SPL%20Exam%20Questions%20FR/90%20-%20Communications.md#^bazl_901_20)* - A) Aircraft callsign and type, nature of the distress situation, pilot’s intentions, position, level, heading. - B) Aircraft callsign, flight route, destination. - C) Aircraft callsign, departure point, position, level. - D) Aircraft callsign, position, assistance required. **Correct: A)** > **Explanation:** A complete distress message must contain: aircraft callsign and type, nature of the distress situation, pilot's intentions, position, altitude, and heading.