Explanation: Swiss VFR regulations define the end of the flying day as 30 minutes after official sunset (or a specified time after evening civil twilight). The landing deadline is looked up in official sunset tables and adjusted for the applicable time zone (MEZ = UTC+1 in winter, MESZ = UTC+2 in summer). June 21 is near the summer solstice, giving the latest sunset of the year; March dates are in standard time (MEZ). Always verify the current eVFG tables, as these values are date and location dependent.
Correct: MSA (Minimum Safe Altitude)
Explanation: On the Swiss ICAO 1:500,000 chart, large bold numbers printed near certain cities or waypoints indicate the Minimum Safe Altitude (MSA) in hundreds of feet for that area (so "87" means 8,700 ft MSL). The MSA provides obstacle clearance of at least 300 m (1000 ft) within a defined radius. Pilots use these values for en-route safety altitude planning, especially important in mountainous terrain like the Swiss Jura and Alps.
Correct: Der TC (True Course)
Explanation: Before a cross-country flight, the pilot should measure and mark the True Course (TC) on the navigation chart using a protractor referenced to the nearest meridian. The TC is the foundation for all subsequent heading calculations: TC → apply variation → MC → apply wind correction → TH → apply deviation → CH. Marking the TC on the chart ensures consistent reference throughout the flight planning process and allows in-flight verification of track.
Correct: Mit Zeitmassstab ueberwachen, bekannte Positionen auf der Karte markieren
Explanation: When approaching a destination over navigationally challenging terrain (forests, featureless plains, or complex topography), the pilot should monitor progress using elapsed time against a pre-calculated time scale, and positively identify known landmarks (towns, rivers, roads) and mark them on the chart. This technique — essentially dead reckoning with regular position fixes — prevents the pilot from overflying the destination or becoming lost. In a glider without GPS, time management is critical to ensure arrival with sufficient altitude.
Correct: Obergrenze der LS-R fuer Segelflug (SF mit reduzierten Wolkenabstaenden)
Explanation: On the Swiss gliding chart cover page, "GND" indicates the lower limit (ground) of certain restricted areas, and the term specifically refers to the upper boundary of LS-R (Luftraum-Segelflug-Reservate) available for gliders operating with reduced cloud separation minima. These zones allow gliders to fly in conditions that would otherwise require instrument flight rules, provided specific weather minima are met. Understanding the legend on the gliding chart cover page is essential for Swiss exam candidates.
Correct: Auf dem SF-Karte Deckblatt aufgefuehrt
Explanation: The Swiss gliding chart cover page contains a complete list of glider frequencies, including ground-to-air and air-to-air communication frequencies organized by region. Common Swiss glider frequencies include 122.300 MHz (universal glider frequency) and regional variants. These must be known before flight as gliders may need to coordinate with each other and with ground stations, especially in busy areas like the Alps or near controlled airspace.
Correct: SF-Karte unten rechts
Explanation: The operating hours of Swiss military airspace and military air traffic services are printed in the lower right corner of the Swiss gliding chart. Military restricted areas (such as those associated with Payerne, Meiringen, and Emmen air bases) may only be active during specific hours, and knowing these hours is critical for planning routes through or near militarily controlled areas. Outside activation times, these areas revert to standard civil airspace classifications.
Correct: Stockhorn: 2190 m / 7185 ft; Stockhornbahn AGL: 180 m / 591 ft
Explanation: The Stockhorn (2190 m / 7185 ft MSL) is a prominent peak in the Bernese Prealps visible on the Swiss ICAO chart. Its elevation appears in meters on the chart, and pilots must be able to convert to feet (using ft = m x 10/3: 2190 x 10/3 = 7300 ft, closely matching 7185 ft). The Stockhorn gondola cable (Stockhornbahn) represents an aerial obstacle 180 m AGL — cables and lifts are marked with AGL heights on the gliding chart as they pose significant hazards to low-flying gliders.
Correct: 188 m / 615 ft
Explanation: The Bantiger tower near Bern is a communication mast shown on the Swiss ICAO and gliding charts at coordinates N46°58.7' / E7°31.7'. Its height is 188 m AGL (615 ft AGL). On the chart, obstacle heights are given in both meters and feet — exam candidates must be able to read the chart and convert between units. Obstacles above 100 m AGL are typically marked with their height and may have obstruction lighting.
Correct: Status Tangosektor massgebend - nicht aktiv (Bale Info) bis FL100; wenn aktiv 1750 m oder hoeher mit Freigabe BSL
Explanation: Egerkingen lies beneath the Tango Sector — a portion of Swiss airspace associated with the Basel/Mulhouse (LFSB/EuroAirport) TMA. When the Tango Sector is inactive (check with Basel Info on the appropriate frequency), the area is uncontrolled airspace up to FL100. When active, the upper limit drops to 1750 m MSL and operations above require a clearance from Basel Approach. This dynamic airspace structure is specific to the Swiss airspace system and requires checking NOTAMs and AIP Switzerland before flight.
Correct: SF-Karte Legende (symbols for controlled vs. uncontrolled fields)
Explanation: Les Eplatures (LSGC) near La Chaux-de-Fonds appears on the Swiss gliding chart with symbols decoded in the chart legend. The legend distinguishes between towered (controlled) and non-towered airfields, glider-specific aerodromes, military fields, and emergency landing strips. Candidates must be able to read the legend and determine the relevant operational information (radio frequencies, runway orientation, airspace class) for any airfield depicted on the chart.
Correct: SF-Karte Legende unten rechts. Achtung: Textbox auf Grenze TMA LSZH 10 (2000 m) und TMA LSZH 3 (1700 m); LSR69 liegt in TMA 3
Explanation: LS-R69 is a glider restricted area near Schaffhausen that lies within the Zurich TMA structure. The area overlaps with TMA LSZH 3 (lower limit 1700 m MSL), not TMA LSZH 10 (2000 m) — this distinction is critical because it determines the altitude at which a clearance becomes necessary. Usage conditions are found in the chart legend lower right, and the text boxes on the chart itself clarify which TMA segment applies. Misidentifying the applicable TMA layer could lead to an airspace infringement.
Correct: N 47 26'36'', E 8 14'02''
Explanation: Birrfeld (LSZF) is a glider aerodrome in the canton of Aargau, Switzerland. Reading exact coordinates from the ICAO 1:500,000 chart requires careful use of the latitude and longitude graticule — each degree is divided into minutes, and at this scale, individual minutes of arc are clearly readable. The ability to read and record precise coordinates is tested because pilots may need to report positions to ATC or verify their location against chart features.
Correct: N 46 35'25'', E 6 24'02''
Explanation: Montricher (LSTR) is a glider airfield in the canton of Vaud, in the French-speaking region of Switzerland. Its coordinates place it on the Swiss Plateau west of Lausanne. Locating it precisely on the ICAO chart and reading the graticule accurately requires practice — at 1:500,000 scale, 1 minute of latitude ≈ 1 NM ≈ 1.85 km, allowing sub-minute precision to be interpolated visually from the grid.
Correct: Willisau
Explanation: Given a set of coordinates, the candidate must locate the point on the Swiss ICAO chart by finding the correct latitude (47°07'N) and longitude (8°00'E) lines and reading the nearest landmark. Willisau is a town in the canton of Lucerne, on the Swiss Plateau. This exercise tests reverse coordinate lookup — starting from numbers and finding the geographic feature, as opposed to the forward direction (finding coordinates from a named place).
Correct: Flugplatz Annemasse
Explanation: These coordinates place the point south of Lake Geneva (Lac Léman) at approximately N46°11' / E6°16', which corresponds to Annemasse aerodrome — a French airfield just across the Swiss-French border near Geneva. This question tests not only chart reading but also awareness that the Swiss ICAO chart extends into neighboring countries (France, Germany, Austria, Italy), and pilots should recognize aerodromes in border regions.
Correct: 239
Explanation: To find the true course between two airfields, place a protractor on the chart aligned to the nearest meridian and measure the angle of the straight line connecting the two points. Grenchen (LSZG) is northeast of Neuenburg/Neuchâtel (LSGN), so the course from Grenchen to Neuchâtel runs roughly southwest — approximately 239° true. On the Lambert conformal chart, straight lines closely approximate great circles, and courses are measured from true north at the midpoint meridian.
Correct: 132
Explanation: Langenthal (LSPL) is northwest of Kaegiswil (LSPG near Sarnen), so the course from Langenthal to Kaegiswil runs roughly southeast — approximately 132° true. This is measured with a protractor on the ICAO chart, aligned to the meridian passing through or near the midpoint of the route. The course of 132° places the destination to the SE, consistent with Kaegiswil's position in the foothills near Lake Sarnen.
Correct: 46,3 km / 25 NM / 28,7 sm
Explanation: The distance is measured with a ruler on the 1:500,000 chart and converted using the scale bar. At 1:500,000, 1 cm on the chart = 5 km in reality. Once the distance in km is known, conversion follows: NM = km / 1.852 ≈ km / 2 + 10% (exam formula), and statute miles = km / 1.609. This route runs along the Vorderrhein valley from Laax ski area toward the Oberalp Pass — a classic Swiss glider cross-country segment.
Correct: 17 Min
Explanation: Simply subtract departure time from arrival time: 15:09 - 14:52 = 17 minutes. This elapsed flight time, combined with the distance from Q69, gives the speed for Q71. In practice, timing legs of a cross-country flight allows the pilot to verify actual groundspeed against planned groundspeed and detect headwind or tailwind differences from the forecast.
Correct: 163 km/h / 88 kts / 101 mph
Explanation: Ground speed = distance / time = 46.3 km / (17/60) h = 46.3 / 0.2833 = 163.4 km/h ≈ 163 km/h. Converting: kts = km/h / 1.852 ≈ 163 / 2 + 10% ≈ 88 kts; mph = km/h / 1.609 ≈ 101 mph. This three-unit speed result is typical of Swiss navigation exam questions, requiring fluency with all three speed units and their conversion relationships.
Correct: 56+43+59+80 = 238 km / 30+23+32+43 = 128 NM
Explanation: This is a triangular cross-country task measured on the chart: from Bellechasse (LSTB) to Buochs, then to the Jungfrau, and back to Bellechasse. Each leg is measured separately with a ruler on the 1:500,000 chart and the distances summed: 56 + 43 + 59 + 80 = 238 km total. Converting each leg to NM individually then summing (or converting the total: 238 / 1.852 ≈ 128 NM) gives the total task distance used for competition scoring and exam questions.
Correct: (43 km / 18 min) x 60 = 143 km/h / 77 kts / 89 mph
Explanation: Ground speed = (distance / time) x 60 to convert minutes to hours: (43 km / 18 min) x 60 = 143.3 km/h ≈ 143 km/h. The 43 km distance is taken from the chart measurement for this leg. Converting: kts ≈ 143 / 1.852 ≈ 77 kts; mph ≈ 143 / 1.609 ≈ 89 mph. This type of in-flight speed check — measuring elapsed time between two known points — is how glider pilots monitor actual vs. planned groundspeed during cross-country flights.
Correct: TMA PAY 7 (E), TMA LSZB1 (D - Freigabe noetig), LR E MTT, LR E Alpen, LS-R15 (falls aktiv), TMA LSME 2, CTR LSMA/LSZC (Freigaben noetig)
Explanation: This question requires reading all airspace layers on the route between Bellechasse and Buochs at 1500 m MSL, using both the ICAO chart and the gliding chart. Airspace Class D areas (TMA LSZB1, CTR LSMA/LSZC) require an ATC clearance before entry. Airspace Class E areas (TMA PAY 7, LR E MTT, LR E Alpen) are accessible under VFR without clearance but IFR flights have priority. LS-R15 is a glider area that may be active. Systematic left-to-right reading of the chart along the route is the required technique.
Correct: 308
Explanation: The Jungfrau is located southeast of Bellechasse (LSTB), so the course FROM Jungfrau TO Bellechasse points northwest. A bearing of 308° is northwest of north, consistent with this geometry. The TC is measured with a protractor on the Lambert conformal chart, aligned to the meridian at the midpoint of the route. Note that this is the reciprocal of the course from Bellechasse to Jungfrau (approximately 128°), which confirms 308° is directionally correct.
